Disclaimer: Reports are provided as a summary only. They are not a verbatim account of the court proceedings and do not contain all details placed before the court. They are not intended to be used as a record of the court proceedings.

On 9 November 2026 a manufacturing company was sentenced in the Southport Magistrates Court for breaching section 32 of the Work Health and Safety Act 2011 (Qld) (‘the Act’), having failed to comply with its duty to ensure plant was without risk to health and safety pursuant to section 21(2) of the Act.

The defendant operated a commercial and residential surface coating business in Biggera Waters.  At the workplace was a Biesse edgebanding machine.  That machine had been installed at the workplace by the manufacturer in September 2017 and had an interlock system, a device which prevented access to moving parts of the edgebander while it was in operation, by locking in place protection cabins.  Approximately 18 months after the machine was installed at the workplace, the interlock device was bypassed by a worker.  The edgebander was regularly serviced and the servicing reports provided to the defendant identified, from as early as 24 October 2019, that the interlock device had been bypassed.

The defendant employed a worker who had been trained in the use of the machine by other workers at the workplace.  On 15 November 2023, that worker was troubleshooting an issue with the edgebander which involved a buildup of swarf (debris).  While undertaking this task, the worker opened the protective cabin doors and placed her hand inside the machine to clear some swarf. She was wearing a glove which was pulled towards a blade within the machine, and part of her thumb was traumatically amputated.  The injured worker lost approximately 40% of her thumb. Had the interlock device been functional, it would have prevented these doors from opening while the edgebander was in operation. 

The defendant failed to ensure the edgebander was without risk to the health and safety of the worker, by failing to ensure that the interlock system was functioning and was not bypassed.

In sentencing, Magistrate Pink took into account the maximum penalty, the timely plea of guilty, and the defendant’s lack of prior history of like offences. Her Honour had regard to relevant authorities, and the principles outlined by Judge Fantin in Steward v Mac Plant and Mac Farms Pty Ltd [2018] QDC 20 and Nicholson v GCMR Project Services Pty Ltd [2025] QCA 242. Her Honour noted that the duty owed by the defendant is a positive one, which requires a duty holder to search for, detect and eliminate, so far as reasonably practicable, risks to health and safety, that regard must be had for workers who are careless, inattentive or inadvertent, and that duty is not transferrable.

Her Honour imposed a fine of $100,000, and exercised her discretion to not record a conviction.

OWHSP contact: enquiries@owhsp.qld.gov.au

Court Report

General
Industry
Manufacturing
Date of offence
Injury
Thumb amputation
Court
Southport Magistrates Court
Magistrate or judge
Magistrate Pink
Decision date
Company
Legislation

Sections 21(2) and 32 of the Work Health and Safety Act 2011

Plea
Guilty
Penalty
$100,000
Maximum fine available
$1,500,000
Professional and legal costs
$1,500
Court costs
$115.50
In default period
N/A
Time to pay
12 months then referred to SPER
Conviction recorded
No